Sup Dudes and Dudettes.
So my pre-Solo flying things are FPV birds running 433 RC and 2.4 video. That said, I have a bunch of 2.4 CP and LP antennas, Omni and directional. One in particular that I want to try out with Solo.
So the question is basically an antenna upgrade question.
I have seen all the antenna upgrades out there are sticking the same antenna on both RP-SMA connectors on the Controller. However, one duder had killer range/results in a wide open area with one Alpha and one stock antenna. This leads to questioning - are the antennas/RF ports on Solo controller transmit and receive respectively? Or are there two separate transceivers, operating on a diversity control (switching to which ever has the strongest signal)?
If it is the later, I'm in a stick a rad CP antenna (13db, 180deg beam width, directional) on one port, while leaving the stock linear whip on the other.
Replies will be appreciated.
So my pre-Solo flying things are FPV birds running 433 RC and 2.4 video. That said, I have a bunch of 2.4 CP and LP antennas, Omni and directional. One in particular that I want to try out with Solo.
So the question is basically an antenna upgrade question.
I have seen all the antenna upgrades out there are sticking the same antenna on both RP-SMA connectors on the Controller. However, one duder had killer range/results in a wide open area with one Alpha and one stock antenna. This leads to questioning - are the antennas/RF ports on Solo controller transmit and receive respectively? Or are there two separate transceivers, operating on a diversity control (switching to which ever has the strongest signal)?
If it is the later, I'm in a stick a rad CP antenna (13db, 180deg beam width, directional) on one port, while leaving the stock linear whip on the other.
Replies will be appreciated.